Virtual machines can be created using a free-Form wizard which allows users to pick resources they need but this can be become cumbersome if the user must pick the same option every time there is a need to provision a VM. Hence, at the end of the wizard, users can choose to create a VM or optionally save a blueprint in the App Store so next time user can just provision the VMs in a single click.
...
- Ensure you have access to at least one resources pool whether you are a tenant admin or a regular user.
...
Credentials store is a service that allows users to store Credentials in the form of username and password or SSH key-Pair in HyperCloud™ Platform. These credentials are then referenced by Blueprints or Free-Form wizard with the help with HyperCloud™ will provision the VM and setup credentials to access the VM. HyperCloud™ Platform Supports 2 types of Credentials
- Key-Pair Store – Create a Key-Pair in HyperCloud™ and uploads it to the public cloud provider.
- Password Store – Saves username and encrypted Password in HyperCloud™ Platform
Note: Password Store is only supported for VMware vSphere, Hyper-V and Microsoft Azure
Creating a Key-Pair Credential Store
- Login to the HyperCloud™ Platform with your credentials Click on Services Orchestration Tab Services Click on Credential Store Click on New & select Key-Pair Store
- Select the Cloud from the Drop-Down: AWS or Azure or GCP
- Enter a Suffix value Name: AWS-KP1
- (AWS Only) From the Resource Pool Drop-Down: Select the Available Resource pool.
Note: If more than 1 AWS Resource pool is available, then repeat this step for each Resource Pool.
- Click on Generate Keys
- To allow other users to access this credential : Click on Users and Groups
- In the Users Text Box: Type the first alphabet of a username you would like to add & select the user
- In the Groups Text Box: Type the first alphabet of a group name you would like to & and select the group.
- Click on Save
Creating a Password Credential Store
- Login to the HyperCloud™ Platform with your credentials Click on Services Orchestration Tab Services
- Click on Credential Store Click on New & select Password Store
- Enter a Name: vm-user
- Enter a Username: vm-user
- Enter a Password: M!SuperS3cretpassw0rd!
- To allow other users to access this credential : Click on Users and Groups
- In the users Text Box: Type the first alphabet of a username you would like to add & select the user
- In the Groups Text Box: Type the first alphabet of a group name you would like to add and select the group.
- Click on Save
...
Virtual Machine blueprints for Microsoft Azure require a Resource Group. All Virtual Machine related objects i.e. disks, ip address, etc. are placed inside this resource group.
Creating a Resource Group
Skip this step, if an existing resource group will be used.
- Login to the HyperCloud™ Platform with your credentials Click on Services Orchestration Tab Services Click on Resource Group Click on New
- Select the Resource Pool for e.g. RP.ARM.EAST US.PROD-RP2
- Enter a Name for e.g. hg-prod-vms-rg
- Click Create Resource Group
Creating Blueprints for Azure VM Provisioning
Use the following steps to Create a Virtual Machine blueprint for Azure VM
- Login to the HyperCloud™ Platform with your credentials Click on Services Orchestration Tab Services
- On the Resource pool page,
- Select the Azure Resource Pool from the drop down list,
Note: Azure resource pool are identified by the prefix RP.ARM.South East Asia.<ResourcePoolName>
- Select the Resource Group: hg-prod-vms-rg Click Next.
- (Optional) Availability Set: Select an existing or create a new Availability set. This is useful when scaling VMs in a load balancer pool
- Select a Size: for e.g. Basic_A2 click Next.
- Select an Image (Operating System): for e.g. CentOS 7.6 click Next.
- Select the Subnet: for e.g hg-prod-vms-subnet1 Click Next.
- Check Assign Public IP : for e.g Basic
- Select the Security Group: for e.g hg-prod-sg1
- On the Add Credentials details page,
- Uncheck Skip Agent Install
Note: Unchecking will install HyperCloud Agent, once the VM is provisioned. This is mandatory if you would like to run plugins once the Virtual machine is successfully provisioned.
- Select Credentials password or Key-Pair store click Next
- On the Entitle Owner page, Select Only Me click Next
- On the Advanced page,
- Enter a prefix: *hg-prod-vms * Click on Review
- Plugins:(Optional) Select a plugin to be run once the VM is provisioned.
Note: To select multiple plugins to run in a sequence, select one plugin and configure the order of execution for e.g. 1 under the advanced options. Click in plugins drop-down and select another plugin and configure order of execution for e.g. 2
- Lease: (Optional) : Enter a number and select either mins, hours or days.
Note: On lease expiration, the VM will get deleted automatically and user will receive an email notification
- Define a VM Start and Stop Schedule (Optional): Choose a start time and duration daily, weekly or monthly
- On the Review page, review the details of the deployment
- VM Count: Update the count of the VM if required.
- Click on Save Blueprint Only which will create a blueprint and open it in the HyperCloud™ AppStore.
- Enter a name for the Blueprint for e.g. OpenLogic:Centos7.6
- Entitled Users:
- To allow all users to access this Blueprint, Click on Everyone
- To allow specific users to access this blueprint, Click on Users & Groups
- In the users Text Box: Type the first alphabet of a username you would like to add & select the user
- In the Groups Text Box: Type the first alphabet of a group name you would like to add and select the group.
- Click on Save Changes
- Entitled Users:
- To deploy the VM from the Blueprint, click on the Blueprint and Click on Create Machine and HyperCloud™ Platform will redirect to the Service Orchestration VMs tab.
Creating Additional Volumes using Blueprints
Use the following steps to edit an existing blueprint and add the YAML for configuring additional volumes post-provisioning of the VM.
- Login to the HyperCloud™ Platform with your credentials Click on Services Orchestration Tab AppStore
- Click on the Blueprint Click on Edit
- In the YAML Editor pane, append the YAML under vol: as shown below:
Machine:
region: westus
group: hg-ub16
image:
instanceType: Basic_A3
resourceGroup: hg-vm-rg
network: hg-vm-vnet1
subnet: hg-vm-vnet1-subnet1
securityGroup: hg-vm-nsg
skipAgentInstall: false
assignFloatingIP: true
publicIPSku: basic
password: "{{credentials2c9180866a79b909016ba03eca9b308c }}"
count: 1
terminationProtection: DISABLED
vols:
- !vol*
prefix: hg-ub16-dd1
size: 10
count: 1|
Note: Size unit is in GB, Prefix will be used to name the volume/disk.
- Click on Save Changes.
- In the YAML Editor pane, append the YAML under vol: as shown below:
- Click on the Blueprint Click on Create Machine.
- Once the VM is provisioned successfully, the Additional Volume will be created in the same resource group and attached to the Virtual Machine
Note: By default, this volume will be mounted under /var/lib/hypercloud.
- Additional volumes created and attached to the VM will be listed under Service Orchestration Services Storage
...
Use the following steps to create a Virtual Machine blueprint for Amazon AWS
- Login to the HyperCloud™ Platform with your credentials Click on Services Orchestration Tab Services
- On the Resource pool page, Select the Amazon AWS Resource Pool from the drop down list,
Note: AWS resource pool are identified by the prefix RP.AWS.ap-southeast-1.<ResourcePoolName>
- Select a Size: for e.g. t2.micro click Next.
- Select an Image (Operating System): for e.g. Amazon Linux 2 AMI (HVM) click Next.
- Select the Subnet: for e.g hg-prod-vms-subnet1 Click Next.
- Select the Security Group: for e.g hg-prod-sg1
- On the Add Credentials details page, Select Key-Pair click Next
- On the Entitle Owner page, Select Only Me click Next
- On the Advanced page,
- Enter a prefix: *hg-prod-vms * Click on Review
- Plugins:(Optional) Select a plugin to be run once the VM is provisioned.
Note: To select multiple plugins to run in a sequence, select one plugin and configure the order of execution for e.g. 1 under the advanced options. Click in plugins drop-down and select another plugin and configure order of execution for e.g. 2
- Lease: (Optional) : Enter a number and select either mins, hours or days.
Note: On lease expiration, the VM will get deleted automatically and user will receive an email notification
- Define a VM Start and Stop Schedule (Optional): Choose a start time and duration daily, weekly or monthly
- On the Review page, review the details of the deployment
- VM Count: Update the count of the VM if required.
- Click on Save Blueprint Only which will create a blueprint and open it in the HyperCloud™ AppStore.
- Enter a name for the Blueprint for e.g. AMI Linux 2
- Entitled Users:
- To allow all users to access this Blueprint, Click on Everyone
- To allow specific users to access this blueprint, Click on Users & Groups
- In the users Text Box: Type the first alphabet of a username you would like to add & select the user
- In the Groups Text Box: Type the first alphabet of a group name you would like to add and select the group.
- Click on Save Changes
- Entitled Users:
- To deploy the VM from the Blueprint, click on the Blueprint and Click on Create Machine
...
Use the following steps to create a Virtual Machine blueprint for Amazon AWS
- Login to the HyperCloud™ Platform with your credentials Click on Services Orchestration Tab Services
- On the Resource pool page,
- Select the Azure Resource Pool from the drop down list,
Note: Azure resource pool are identified by the prefix RP.VMW.AZ1.<ResourcePoolName>
- Select a Size: cpu=2,memory=4GB,disk=40GB click Next.
- Select an Image (Operating System): for e.g. VMT-Win2016x64 click Next.
- Select the Subnet: for e.g dvs-vlan-100 Click Next.
- On the Customization page, Select one of the following:
- Using Cloud Image (Recommended)
Note: This requires VMware Template to be installed and configured with cloud-init.
- Using SSH via Login Credentials
Note: This will install the HyperCloud Agent via SSH. (Linux VM only)
- Skip Agent Install
Note: HyperGrid Support can help setup Guest Customization to enable agent installation
- Click Next
- On the Entitle Owner page, Select Only Me click Next
- On the Advanced page,
- Enter a prefix: *hg-prod-vms * Click on Review
- Plugins:(Optional) Select a plugin to be run once the VM is provisioned.
Note: To select multiple plugins to run in a sequence, select one plugin and configure the order of execution for e.g. 1 under the advanced options. Click in plugins drop-down and select another plugin and configure order of execution for e.g. 2
- Lease: (Optional) : Enter a number and select either mins, hours or days.
Note: On lease expiration, the VM will get deleted automatically and user will receive an email notification
...
- Define a VM Start and Stop Schedule (Optional): Choose a start time and duration daily, weekly or monthly
...
- VM Count: Update the count of the VM if required.
- Click on Save Blueprint Only which will create a blueprint and open it in the HyperCloud™ AppStore.
...
- Entitled Users:
- To allow all users to access this Blueprint, Click on Everyone
- To allow specific users to access this blueprint, Click on Users & Groups
- In the users Text Box: Type the first alphabet of a username you would like to add & select the user
- In the Groups Text Box: Type the first alphabet of a group name you would like to add and select the group.
- Click on Save Changes
...
Overview
...
You can create a Virtual Machine (VM) using the Free-form wizard. You can select and provision as many VMs as you require using the Free-form wizard. Adding multiple resources on an ongoing basis is a cumbersome process. If you have to provision VMs regularly, you can create a VM blueprint using the Free-form wizard and publish it on the HCP App Store.
Configure Credential Store
...
Before you provision a VM, you'll need to configure the Credential Store. You can configure the credentials store using:
Provision your Virtual Machines (VMs)
...
You can provision VMs for these services providers using blueprints: