Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Virtual machines can be created using a free-Form wizard which allows users to pick resources they need but this can be become cumbersome if the user must pick the same option every time there is a need to provision a VM. Hence, at the end of the wizard, users can choose to create a VM or optionally save a blueprint in the App Store so next time user can just provision the VMs in a single click.

Configuring credentials store

Credentials store is a service that allows users to store Credentials in the form of username and password or SSH key-Pair in HyperCloud™ Platform. These credentials are then referenced by Blueprints or Free-Form wizard with the help with HyperCloud™ will provision the VM and setup credentials to access the VM. HyperCloud™ Platform Supports 2 types of Credentials

  1. Key-Pair Store – Create a Key-Pair in HyperCloud™ and uploads it to the public cloud provider.
  2. Password Store – Saves username and encrypted Password in HyperCloud™ Platform

Note: Password Store is only supported for VMware vSphere, Hyper-V and Microsoft Azure

Creating a Key-Pair Credential Store

  • Login to the HyperCloud™ Platform with your credentials  Click on Services Orchestration Tab  Services Click on Credential Store  Click on New & select Key-Pair Store
    • Select the Cloud from the Drop-Down: AWS or Azure or GCP
    • Enter a Suffix value Name: AWS-KP1
    • (AWS Only) From the Resource Pool Drop-Down: Select the Available Resource pool.

Note: If more than 1 AWS Resource pool is available, then repeat this step for each Resource Pool.

    • Click on Generate Keys
    • To allow other users to access this credential : Click on Users and Groups
      • In the Users Text Box: Type the first alphabet of a username you would like to add & select the user
      • In the Groups Text Box: Type the first alphabet of a group name you would like to & and select the group.
    • Click on Save

Creating a Password Credential Store

  • Login to the HyperCloud™ Platform with your credentials  Click on Services Orchestration Tab  Services
  • Click on Credential Store  Click on New & select Password Store
    • Enter a Name: vm-user
    • Enter a Username: vm-user
    • Enter a Password: M!SuperS3cretpassw0rd!
    • To allow other users to access this credential : Click on Users and Groups
      • In the users Text Box: Type the first alphabet of a username you would like to add & select the user
      • In the Groups Text Box: Type the first alphabet of a group name you would like to add and select the group.
    • Click on Save

Provisioning Microsoft Azure VMs using Blueprints

Virtual Machine blueprints for Microsoft Azure require a Resource Group. All Virtual Machine related objects i.e. disks, ip address, etc. are placed inside this resource group.

Creating a Resource Group

Skip this step, if an existing resource group will be used.

  • Login to the HyperCloud™ Platform with your credentials  Click on Services Orchestration Tab  Services Click on Resource Group  Click on New
    • Select the Resource Pool for e.g. RP.ARM.EAST US.PROD-RP2
    • Enter a Name for e.g. hg-prod-vms-rg
    • Click Create Resource Group

Creating Blueprints for Azure VM Provisioning

Use the following steps to Create a Virtual Machine blueprint for Azure VM

  • Login to the HyperCloud™ Platform with your credentials  Click on Services Orchestration Tab  Services
  • On the Resource pool page,
    • Select the Azure Resource Pool from the drop down list,

Note: Azure resource pool are identified by the prefix RP.ARM.South East Asia.<ResourcePoolName>

    • Select the Resource Group: hg-prod-vms-rg Click Next.
    • (Optional) Availability Set: Select an existing or create a new Availability set. This is useful when scaling VMs in a load balancer pool
  • Select a Size: for e.g. Basic_A2 click Next.
  • Select an Image (Operating System): for e.g. CentOS 7.6click Next.
  • Select the Subnet: for e.g hg-prod-vms-subnet1  Click Next.
  • Check Assign Public IP : for e.g Basic
  • Select the Security Group: for e.g hg-prod-sg1
  • On the Add Credentials details page,
    • Uncheck Skip Agent Install

Note: Unchecking will install HyperCloud Agent, once the VM is provisioned. This is mandatory if you would like to run plugins once the Virtual machine is successfully provisioned.

    • Select Credentials password or Key-Pair store click Next
  • On the Entitle Owner page, Select Only Me  click Next
  • On the Advanced page,
    • Enter a prefix: *hg-prod-vms * Click on Review
    • Plugins:(Optional) Select a plugin to be run once the VM is provisioned.

Note: To select multiple plugins to run in a sequence, select one plugin and configure the order of execution for e.g. 1 under the advanced options. Click in plugins drop-down and select another plugin and configure order of execution for e.g. 2

    • Lease: (Optional) : Enter a number and select either mins, hours or days.

Note: On lease expiration, the VM will get deleted automatically and user will receive an email notification

    • Define a VM Start and Stop Schedule (Optional): Choose a start time and duration daily, weekly or monthly
  • On the Review page, review the details of the deployment
    • VM Count: Update the count of the VM if required.
    • Click on Save Blueprint Only which will create a blueprint and open it in the HyperCloud™ AppStore.
  • Enter a name for the Blueprint for e.g. OpenLogic:Centos7.6
    • Entitled Users:
      • To allow all users to access this Blueprint, Click on Everyone
      • To allow specific users to access this blueprint, Click on Users & Groups
        • In the users Text Box: Type the first alphabet of a username you would like to add & select the user
        • In the Groups Text Box: Type the first alphabet of a group name you would like to add and select the group.
    • Click on Save Changes
  • To deploy the VM from the Blueprint, click on the Blueprint and Click on Create Machine and HyperCloud™ Platform will redirect to the Service Orchestration  VMs tab.

Creating Additional Volumes using Blueprints

Use the following steps to edit an existing blueprint and add the YAML for configuring additional volumes post-provisioning of the VM.

...

In the YAML Editor pane, append the YAML under vol: as shown below:

Machine:
region: westus
group: hg-ub16
image:
instanceType: Basic_A3
resourceGroup: hg-vm-rg
network: hg-vm-vnet1
subnet: hg-vm-vnet1-subnet1
securityGroup: hg-vm-nsg
skipAgentInstall: false
assignFloatingIP: true
publicIPSku: basic
password: "{{credentials

2c9180866a79b909016ba03eca9b308c }}"
count: 1
terminationProtection: DISABLED
vols:

  • !vol*
    prefix: hg-ub16-dd1
    size: 10
    count: 1|
    Note: Size unit is in GB, Prefix will be used to name the volume/disk.
  • Click on Save Changes.

...

Note: By default, this volume will be mounted under /var/lib/hypercloud.

  • Additional volumes created and attached to the VM will be listed under Service Orchestration  Services  Storage

...

Use the following steps to create a Virtual Machine blueprint for Amazon AWS

  • Login to the HyperCloud™ Platform with your credentials  Click on Services Orchestration Tab  Services
  • On the Resource pool page, Select the Amazon AWS Resource Pool from the drop down list,

Note: AWS resource pool are identified by the prefix RP.AWS.ap-southeast-1.<ResourcePoolName>

  • Select a Size: for e.g. t2.micro click Next.
  • Select an Image (Operating System): for e.g. Amazon Linux 2 AMI (HVM) click Next.
  • Select the Subnet: for e.g hg-prod-vms-subnet1 Click Next.
  • Select the Security Group: for e.g hg-prod-sg1
  • On the Add Credentials details page, Select Key-Pair  click Next
  • On the Entitle Owner page, Select Only Me  click Next
  • On the Advanced page,
    • Enter a prefix: *hg-prod-vms * Click on Review
    • Plugins:(Optional) Select a plugin to be run once the VM is provisioned.

Note: To select multiple plugins to run in a sequence, select one plugin and configure the order of execution for e.g. 1 under the advanced options. Click in plugins drop-down and select another plugin and configure order of execution for e.g. 2

    • Lease: (Optional) : Enter a number and select either mins, hours or days.

Note: On lease expiration, the VM will get deleted automatically and user will receive an email notification

    • Define a VM Start and Stop Schedule (Optional): Choose a start time and duration daily, weekly or monthly
  • On the Review page, review the details of the deployment
    • VM Count: Update the count of the VM if required.
    • Click on Save Blueprint Only which will create a blueprint and open it in the HyperCloud™ AppStore.
  • Enter a name for the Blueprint for e.g. AMI Linux 2
    • Entitled Users:
      • To allow all users to access this Blueprint, Click on Everyone
      • To allow specific users to access this blueprint, Click on Users & Groups
        • In the users Text Box: Type the first alphabet of a username you would like to add & select the user
        • In the Groups Text Box: Type the first alphabet of a group name you would like to add and select the group.
    • Click on Save Changes
  • To deploy the VM from the Blueprint, click on the Blueprint and Click on Create Machine

...

Use the following steps to create a Virtual Machine blueprint for Amazon AWS

  • Login to the HyperCloud™ Platform with your credentials  Click on Services Orchestration Tab  Services
  • On the Resource pool page,
    • Select the Azure Resource Pool from the drop down list,

Note: Azure resource pool are identified by the prefix RP.VMW.AZ1.<ResourcePoolName>

  • Select a Size: cpu=2,memory=4GB,disk=40GB click Next.
  • Select an Image (Operating System): for e.g. VMT-Win2016x64 click Next.
  • Select the Subnet: for e.g dvs-vlan-100 Click Next.
  • On the Customization page, Select one of the following:
    • Using Cloud Image (Recommended)

Note: This requires VMware Template to be installed and configured with cloud-init.

    • Using SSH via Login Credentials

Note: This will install the HyperCloud Agent via SSH. (Linux VM only)

    • Skip Agent Install

Note: HyperGrid Support can help setup Guest Customization to enable agent installation

    • Click Next
  • On the Entitle Owner page, Select Only Me  click Next
  • On the Advanced page,
    • Enter a prefix: *hg-prod-vms * Click on Review
    • Plugins:(Optional) Select a plugin to be run once the VM is provisioned.

Note: To select multiple plugins to run in a sequence, select one plugin and configure the order of execution for e.g. 1 under the advanced options. Click in plugins drop-down and select another plugin and configure order of execution for e.g. 2

    • Lease: (Optional) : Enter a number and select either mins, hours or days.

Note: On lease expiration, the VM will get deleted automatically and user will receive an email notification

    • Define a VM Start and Stop Schedule (Optional): Choose a start time and duration daily, weekly or monthly
  • On the Review page, review the details of the deployment
    • VM Count: Update the count of the VM if required.
    • Click on Save Blueprint Only which will create a blueprint and open it in the HyperCloud™ AppStore.
  • Enter a name for the Blueprint for e.g. Win2k16
    • Entitled Users:
      • To allow all users to access this Blueprint, Click on Everyone
      • To allow specific users to access this blueprint, Click on Users & Groups
        • In the users Text Box: Type the first alphabet of a username you would like to add & select the user
        • In the Groups Text Box: Type the first alphabet of a group name you would like to add and select the group.
    • Click on Save Changes
  • To deploy the VM from the Blueprint, click on the Blueprint and Click on Create Machine