Adding or Editing Tags

This section provides information on the procedure that must be followed to add or edit tags. The procedure mentioned below is applicable to all tags across the CSP application. In the CSP application, the tags are present in the following pages:

• Governance & Security > Inventory (Tags are used for searching the necessary resources)

Open

• Governance & Security > Inventory > Resource Criticality (Tags are added while defining the resource criticality. Specifically, while creating a rule)

Open

• Governance & Security > Budget Management (Tags are added while creating a new budget)

• Governance & Security > COST & USAGE (Tags are used to filter and view the cost and usage report)

To add or edit tags,

1. Login to the portal with the required credentials.

2. Navigate to one of the above listed pages based on the requirement.

3. Move the pointer to the section concerning tags and click the icon associated with addition of tags (refer the screenshots above). The Add /Edit Tag window is displayed.

4. From the drop-down menu, select one of the two options, to decide if any or all the keys must be considered.

5. From the select a Key drop-down menu, select a key.

6. From the operator drop-down menu, select the necessary option.

7. From the enter value drop-down menu, select the value that must be assigned to the key.

8. If needed, add additional keys by clicking the + icon.

9. Click Apply. Your changes are applied successfully.