Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

As we can see there are two parts to IP Discovery.

1: ICMP Discovery:

    ScanEngine will PING an a given IP address and awaits an respond, if there is an Device capable to respond to PING ScanEngine will mark the IP in question as success and move to the second part of the IP Discovery.

...

    Based on the outcome of the Port scan we will "guess" what type of the Device it is and append an Suspected OS to it, if applicable or, if the certainty is high enough to guess the OS.


NOTE: As mentioned above we really guess the OS and that is due to fact that ScanEngine will NOT ATTEMPT to log in into the found Device.



How to set up an IP Discovery Project.

...


It's highly recommended to use one ScanEngine per 0.5 million IP's or /13  Subnet, per Location. This will speed up the Discovery process.

We recommend to disable Target logging as well, so the ScanEngine performance on Disk IO will be as minimal as possible. There will be nothing to report in the Targets logs anyway and therefore are not required for any troubleshooting purpose.

Target logging disable:

...

2: In the Config navigate to part where appender-ref part is as shown bellow and comment out the part for <appender-ref ref="TargetFileAppender"/> shown in green

    NOTE: This is ordinary XML file format and there for XML stile is required.

</appender>
<root>
    <level value="FATAL"/>
    <!--<appender-ref ref="TargetFileAppender"/>-->
    <appender-ref ref="LogFileAppender"/>
    <appender-ref ref="ConsoleAppender"/>
    <appender-ref ref="TraceAppender"/>
    <appender-ref ref="ContextAppender"/>
    <appender-ref ref="EventLogAppender"/>
</root>

3: Once done, save file and restart the iQSonar service to pick up the new change we did.

...

.

Let's now focus on how to create and set up the Location with all necessary Connections and Product Adapters for IP Discovery only.

...

  1. Lets add an Subnet we would like to scan, create a Sub-Location (One Location per ScanEngine Adjust the Server Settings accordingly to set appropriated ScanEngine for the Location) Details page can be left as is, Scan Window can be setup if needed. Target sets, click on Create
    Choose Target as Device
    Type as Subnet
    Name is mandatory: We will use IPSubnet24 in this example.
    Start IP will be Subnet first IP: 192.168.1.0                            NOTE: https://kthx.at/subnetmask/  List of Subnets with all details
    Subnet Mask Bits: 24
    Click on Save & Close

...

  1. Project Summary page will show how many Targets we setup to scan and how many Devices scan did find.

  2. Diagnostics page will show more details about each found device as shown bellow

     

   

     



     3. Getting the results from the iQSonarSE DB.

...