Page Comparison

This article details how to generate report using the RestAPI which will mirror as closely as possible the "OutputDevices" report which was available in V3 of iQSonar

...

Field	V3 Comment	RestAPI Comment
Hostname	Hostname of the device	Get this from the /devices RestAPI endpoint
FQDN	Fully QUalified Domain Name of the device	Get this from the /devices/{Device_ID} RestAPI endpoint
OS	OS description and service pack	Get this from the /devices/{Device_ID} RestAPI endpoint
OS Install Date	OS description and service pack	Get this from the /devices/{Device_ID} RestAPI endpoint May not always be available
Location	Location of the device	In V4 this represents the target configuration set used to define the device. Get this from the /devices RestAPI endpoint
Serial Number	The serial number of the device	Get this from the /devices RestAPI endpoint
PhysicalCPUCount	Number of physical CPUs or sockets in the Physical Device (which may differ from the Virtual or Logical host when a device is a virtual machine or partition)	IF the device is a physical device, this information is derived from the /devices/{Device_ID} RestAPI endpoint IF the device is a virtual device AND we have scanned the virtualisation host, the information is also available. Where the virtualisation host is not scanned, then this field and all the other information about the physical host will not be able to be populated.
PhysicalCoreCount	Sum of cores across all CPUs in the Physical Device (which may differ from the Virtual or Logical host when a device is a virtual machine or partition)	Get this from the /devices/{Device_ID} RestAPI endpoint; May not always be available
PhysicalCoresPerCPU	Physical core count divided by the physical CPU count	Get this from the /devices/{Device_ID} RestAPI endpoint; May not always be available
PhysicalCPUManufacturer	Manufacturer of the CPU on the Physical Device	Get this from the /devices/{Device_ID} RestAPI endpoint; May not always be available
PhysicalCPUModel	Model of the CPU on the Physical Device	Get this from the /devices/{Device_ID} RestAPI endpoint; May not always be available
PhysicalCPUSpeed	Speed of the CPU on the Physical Device	Get this from the /devices/{Device_ID} RestAPI endpoint; May not always be available
PhysicalRAM	Total amount of RAM on the Physical Device	Get this from the /devices/{Device_ID} RestAPI endpoint; May not always be available
VirtualCPUCount	Number of Virtual CPUs perceived by the device (only populated when the device is Virtual or Logical)	Get this from the /devices/{Device_ID} RestAPI endpoint; Only available if device is virtual or logical
VirtualCoreCount	Sum of Cores perceived by the device (only populated when the device is Virtual or Logical)	Get this from the /devices/{Device_ID} RestAPI endpoint; Only available if device is virtual or logical
VirtualRAM	Amount of perceived RAM by the device (only populated when the device is Virtual or Logical)	Get this from the /devices/{Device_ID} RestAPI endpoint; Only available if device is virtual or logical
DeviceModel	Model of the device	Get this from the /devices RestAPI endpoint for a physical device.
PhysicalModelSocketCount	Number of sockets that may be populated with physical CPUs on the Physical Device	Get this from the /devices/{Device_ID} RestAPI endpoint; May not always be available
PhysicalModelCoreCount	Maximum number of cores per CPU according to the model documentation	Get this from the /devices/{Device_ID} RestAPI endpoint; May not always be available
PhysicalDeviceManufacturer	Manufacturer of the Physical Device	Get this from the /devices/{Device_ID} RestAPI endpoint; May not always be available
PhysicalHostname	Hostname of the Physical Device	Get this from the /devices/{Device_ID} RestAPI endpoint for virtual devices; May not always be available
PhysicalFQDN	Fully Qualified Domain Name of the Physical Device	Get this from the /devices/{Device_ID} RestAPI endpoint; May not always be available
IP Address	If more than 1, will be semi-colon separated. Info such as DHCPServer from IPAddress table will not be in OutputDevices. Will only include IPv4.	V4 also exposes IP6 addresses.
PhysicalMACAddress	If more than 1, will be semi-colon separated.
VirtualMACAddress	If more than 1, will be semi-colon separated.
ClusterInformation	The virtualization cluster that the physical machine is part of	Only available if it is part of a cluster, and the cluster has been scanned
ClusterName	Name of cluster	Only available if it is part of a cluster, and the cluster has been scanned
PartitioningMethod	Virtualization Method (VMware, HyperV, LPAR etc.). If this field is null it indicates the device is physical.
DerivedCPU		Not directly available via RestAPI. Must be coded in the script.
DerivedCoresPerCPU		Not directly available via RestAPI. Must be coded in the script.
Bios	Concatenation of Device.BIOSName, DeviceBIOSManufacturer, Device.BIOSVersion separated by semi-colons.	Get this from the /devices/{Device_ID} RestAPI endpoint.
LastScanDate	Last date the device was scanned	Get this from the /devices/{Device_ID} RestAPI endpoint.
DeviceID	The unique identifier for this device	The Rest API gives unique identifiers in GUID format
PhysicalDeviceID	The unique identifier of the Physical Device (where relevant) – used to map logical devices or Virtual machines back to the Physical Device which hosts them.	Get this from the /devices/{Device_ID} RestAPI endpoint; May not always be available
PhysicalCPUNotes	Notes that indicate CPU vs socket mismatches or CPU core values that don’t match the CPU model	This V3 data is not directly available via RestAPI. This functionality is part of DataHub for V4, and if required must be coded in the script.
Notes	Notes related to the device model	This V3 data is not directly available via RestAPI. This functionality is part of DataHub for V4, and if required must be coded in the script.
ExternalLink	Link to model documentation from the vendor	This V3 data is not available via RestAPI.
DNSHostname	The hostname of the device as reported from DNS	Get this from the /devices/{Device_ID} RestAPI endpoint; May not always be available
DNSFQDN	The fully qualified hostname of the device as reported from DNS	Get this from the /devices/{Device_ID} RestAPI endpoint; May not always be available
PhysicalDNSHostname	The hostname of the physical device as reported from DNS	Get this from the /devices/{Device_ID} RestAPI endpoint; May not always be available
PhysicalDNSFQDN	The fully qualified hostname of the physical device as reported from DNS	Get this from the /devices/{Device_ID} RestAPI endpoint; May not always be available
MeasurementComment	Will contain additional info such as “Believed to be: Oracle Linux Server release 5.7” where appropriate	This V3 data is not available via RestAPI.

...

Code Block

language	powershell
theme	Midnight
title	Process info from the Devices endpoint

$fs     = 100			# fetch_size
$offset = 1				# offset
$seen   = 1;			# first offset is 1, not 0
while ( $seen -lt $devicecount)
{
	# Outer loop, grab a batch (defined by fetch_size) of devices
	$url = -join ("http://", $sonar, "/api/v1/devices/?offset=", $offset,  "&fetch_size=", $fs)
	$devices = Invoke-RestMethod $url -Credential $credential
	$i = 1
	while ($i -lt $devices.count)
	{
		# inner loop - process individual devices in this batch
		# We want to populate some of the data fields in the CSV file - what can we fill in just from the DEVICES end point
		$row = New-Object System.Object		
		$row | Add-Member -MemberType NoteProperty -Name "DeviceID" -Value $dev$devices[$i].device_id
		
		# If the path was only partly successful we might not have a serial number. However we can safely store the empty string.
		# if you are processing RestAPI using PHP or a different scripting language that is stricter about handling undefined variables,
		# you need error handling code around here too.
		$row | Add-Member -MemberType NoteProperty -Name "Serial-Number" -Value $dev$devices[$i].serial_number
		
		# For certain devices, for example some SNMP devices, or for storage devices we might not get a hostname! Explicitly call out a device with no hostname. 
		# Also if hostname is not defined, there will be no qualified name(s)
		if (!$devices[$i].host_name)
		{
			# Hostname is not defined
			$row | Add-Member -MemberType NoteProperty -Name "Hostname" -Value "(undefined)"
			$row | Add-Member -MemberType NoteProperty -Name "FQDN" -Value "(undefined)"
			$row | Add-Member -MemberType NoteProperty -Name "DNSFQDN" -Value "(undefined)"
		}
		else {
			# Hostname is defined
			$row | Add-Member -MemberType NoteProperty -Name "Hostname" -Value $dev$devices[$i].host_name
			# If the array is not present, $num gets value 0, and so the inner loop will not fire
			# we have already set FQDN and DNSFQDN to "(undefined)" where there is no hostname, but we can sometimes have a hostname but no FQDN
			$num = $devices[$i].qualified_name.count
			if ($num -eq 0)
			{
				$row | Add-Member -MemberType NoteProperty -Name "FQDN" -Value "(undefined)"
				$row | Add-Member -MemberType NoteProperty -Name "DNSFQDN" -Value "(undefined)"
			}
			else
			{
				$j   = 0
				$fqdn = "(No FQDN)"
				while ($j -lt $num)
				{
					if ($devices[$i].qualified_name[$j].name_type -eq "DNSFQDN")
					{
						# DNSFQDN can also be used for FQDN.
						$fqdn = $devices[$i].qualified_name[$j].name
						$row | Add-Member -MemberType NoteProperty -Name "DNSFQDN" -Value $devices[$i].qualified_name[$j].name
						$row | Add-Member -MemberType NoteProperty -Name "FQDN" -Value $devices[$i].qualified_name[$j].name
					}
					elseif ($devices[$i].qualified_name[$j].name_type -eq "FQDN")
					{
						$row | Add-Member -MemberType NoteProperty -Name "FQDN" -Value $devices[$i].qualified_name[$j].name
					}
					$j = $j + 1
				}
			}		
		}
		# Locations is an array containing one or more locations. We can store locations[0].name as the location
		$row | Add-Member -MemberType NoteProperty -Name "Location" -Value $devices[$i].locations[0].name

		# The Last Scan Date should always be there, but if absent PowerShell will happily record a NULL value for us.
		$row | Add-Member -MemberType NoteProperty -Name "LastScanDate" -Value $devices[$i].last_scan
				
		$csv += $row
		$i = $i + 1;		# keep track for inner loop
		$seen = $seen + 1;  # keep track for outer loop
	}
	# Finished this batch
	$offset = $seen
}

...

Code Block

language	powershell
theme	Midnight
title	Completed Script
linenumbers	true
collapse	true

#
# PowerShell Worked Examples
#
# Generate OutputDevices equivalent report via RestAPI
#

# The RestAPI uses HTTP authentication. Set $user and $pass to the username and password needed for your iQSonar instance
# set the $host to the IPAddress, name or FQDN of the iQSonar server
$user    = "admin"
# $pass    = "password"
$pass    = "!Passw0rd"
# $sonar	 = "iQSonar Host"
$sonar	
= "vm-mike-gr3a"

$secpass = ConvertTo-SecureString $pass -AsPlainText -Force
$credential = New-Object System.Management.Automation.PSCredential($user,$secpass)

 
#
# To find out how many devices there are, ask for the first device and look at the header for the device count
# offset=1 means start with first device. fetch_size=1 means only return one record.
$uri     = -join ("http://", $sonar, "/api/v1/devices/?offset=1&fetch_size=1")
$r = Invoke-WebRequest $uri -Credential $credential
 
# $r.headers has HTML headers, $r.content has text content
$deviceCount = $r.headers.'X-fetch-count'

# Let the user know how many devices we can see
$output = -join ( "There are: ", $deviceCount, " devices in total")
write-host $output

# Build the CSV File header row
$csv = @()
$row = New-Object System.Object
$row | Add-Member -MemberType NoteProperty -Name "Hostname" -Value $null
$row | Add-Member -MemberType NoteProperty -Name "FQDN" -Value $null
$row | Add-Member -MemberType NoteProperty -Name "OS" -Value $null
$row | Add-Member -MemberType NoteProperty -Name "OS-Install-Date" -Value $null
$row | Add-Member -MemberType NoteProperty -Name "Location" -Value $null
$row | Add-Member -MemberType NoteProperty -Name "Serial-Number" -Value $null
$row | Add-Member -MemberType NoteProperty -Name "PhysicalCPUCount" -Value $null
$row | Add-Member -MemberType NoteProperty -Name "PhysicalCoreCount" -Value $null
$row | Add-Member -MemberType NoteProperty -Name "PhysicalCoresPerCPU" -Value $null
$row | Add-Member -MemberType NoteProperty -Name "PhysicalCPUManufacturer" -Value $null
$row | Add-Member -MemberType NoteProperty -Name "PhysicalCPUModel" -Value $null
$row | Add-Member -MemberType NoteProperty -Name "PhysicalCPUSpeed" -Value $null
$row | Add-Member -MemberType NoteProperty -Name "PhysicalRAM" -Value $null
$row | Add-Member -MemberType NoteProperty -Name "VirtualCPUCount" -Value $null
$row | Add-Member -MemberType NoteProperty -Name "VirtualCoreCount" -Value $null
$row | Add-Member -MemberType NoteProperty -Name "VirtualRAM" -Value $null
$row | Add-Member -MemberType NoteProperty -Name "DeviceModel" -Value $null
$row | Add-Member -MemberType NoteProperty -Name "PhysicalModelSocketCount" -Value $null
$row | Add-Member -MemberType NoteProperty -Name "PhysicalModelCoreCount" -Value $null
$row | Add-Member -MemberType NoteProperty -Name "PhysicalDeviceManufacturer" -Value $null
$row | Add-Member -MemberType NoteProperty -Name "PhysicalHostname" -Value $null
$row | Add-Member -MemberType NoteProperty -Name "PhysicalFQDN" -Value $null
$row | Add-Member -MemberType NoteProperty -Name "IP-Address" -Value $null
$row | Add-Member -MemberType NoteProperty -Name "PhysicalMACAddress" -Value $null
$row | Add-Member -MemberType NoteProperty -Name "VirtualMACAddress" -Value $null
$row | Add-Member -MemberType NoteProperty -Name "ClusterInformation" -Value $null
$row | Add-Member -MemberType NoteProperty -Name "ClusterName" -Value $null
$row | Add-Member -MemberType NoteProperty -Name "PartitioningMethod" -Value $null
$row | Add-Member -MemberType NoteProperty -Name "DerivedCPU" -Value $null
$row | Add-Member -MemberType NoteProperty -Name "DerivedCoresPerCPU" -Value $null
$row | Add-Member -MemberType NoteProperty -Name "Bios" -Value $null
$row | Add-Member -MemberType NoteProperty -Name "LastScanDate" -Value $null
$row | Add-Member -MemberType NoteProperty -Name "DeviceID" -Value $null
$row | Add-Member -MemberType NoteProperty -Name "PhysicalDeviceID" -Value $null
$row | Add-Member -MemberType NoteProperty -Name "PhysicalCPUNotes" -Value $null
$row | Add-Member -MemberType NoteProperty -Name "Notes" -Value $null
$row | Add-Member -MemberType NoteProperty -Name "ExternalLink" -Value $null
$row | Add-Member -MemberType NoteProperty -Name "DNSHostname" -Value $null
$row | Add-Member -MemberType NoteProperty -Name "DNSFQDN" -Value $null
$row | Add-Member -MemberType NoteProperty -Name "PhysicalDNSHostname" -Value $null
$row | Add-Member -MemberType NoteProperty -Name "PhysicalDNSFQDN" -Value $null
$row | Add-Member -MemberType NoteProperty -Name "MeasurementComment" -Value $null


$fs     = 100			# fetch_size
$offset = 1				# offset
$seen   = 1;			# first offset is 1, not 0
while ( $seen -lt $devicecount)
{
	# Outer loop, grab a batch (defined by fetch_size) of devices
	$url = -join ("http://", $sonar, "/api/v1/devices/?offset=", $offset,  "&fetch_size=", $fs)
	$devices = Invoke-RestMethod $url -Credential $credential
	$i = 1
	while ($i -lt $devices.count)
	{
		# inner loop - process individual devices in this batch
		# We want to populate some of the data fields in the CSV file - what can we fill in just from the DEVICES end point
		$row = New-Object System.Object		
		$row | Add-Member -MemberType NoteProperty -Name "DeviceID" -Value $dev$devices[$i].device_id
		
		# If the path was only partly successful we might not have a serial number. However we can safely store the empty string.
		# if you are processing RestAPI using PHP or a different scripting language that is stricter about handling undefined variables,
		# you need error handling code around here too.
		$row | Add-Member -MemberType NoteProperty -Name "Serial-Number" -Value $dev$devices[$i].serial_number
		
		# For certain devices, for example some SNMP devices, or for storage devices we might not get a hostname! Explicitly call out a device with no hostname. 
		# Also if hostname is not defined, there will be no qualified name(s)
		if (!$devices[$i].host_name)
		{
			# Hostname is not defined
			$row | Add-Member -MemberType NoteProperty -Name "Hostname" -Value "(undefined)"
			$row | Add-Member -MemberType NoteProperty -Name "FQDN" -Value "(undefined)"
			$row | Add-Member -MemberType NoteProperty -Name "DNSFQDN" -Value "(undefined)"
		}
		else {
			# Hostname is defined
			$row | Add-Member -MemberType NoteProperty -Name "Hostname" -Value $dev$devices[$i].host_name
			# If the array is not present, $num gets value 0, and so the inner loop will not fire
			# we have already set FQDN and DNSFQDN to "(undefined)" where there is no hostname, but we can sometimes have a hostname but no FQDN
			$num = $devices[$i].qualified_name.count
			if ($num -eq 0)
			{
				$row | Add-Member -MemberType NoteProperty -Name "FQDN" -Value "(undefined)"
				$row | Add-Member -MemberType NoteProperty -Name "DNSFQDN" -Value "(undefined)"
			}
			else
			{
				$j   = 0
				$fqdn = "(No FQDN)"
				while ($j -lt $num)
				{
					if ($devices[$i].qualified_name[$j].name_type -eq "DNSFQDN")
					{
						# DNSFQDN can also be used for FQDN.
						$fqdn = $devices[$i].qualified_name[$j].name
						$row | Add-Member -MemberType NoteProperty -Name "DNSFQDN" -Value $devices[$i].qualified_name[$j].name
						$row | Add-Member -MemberType NoteProperty -Name "FQDN" -Value $devices[$i].qualified_name[$j].name
						if ($currDevice.is_virtual -eq "false")
						{
							$row | Add-Member -MemberType NoteProperty -Name "PhysicalDNSHostname" -Value $null
							$row | Add-Member -MemberType NoteProperty -Name "PhysicalDNSFQDN" -Value $devices[$i].qualified_name[$j].name
						}
					}
					elseif ($devices[$i].qualified_name[$j].name_type -eq "FQDN")
					{
						$row | Add-Member -MemberType NoteProperty -Name "PhysicalDNSHostname" -Value $null
						$row | Add-Member -MemberType NoteProperty -Name "FQDN" -Value $devices[$i].qualified_name[$j].name
					}
					$j = $j + 1
				}
			}		
		}
		# Locations is an array containing one or more locations. We can store locations[0].name as the location
		$row | Add-Member -MemberType NoteProperty -Name "Location" -Value $devices[$i].locations[0].name
		
		# The Last Scan Date should always be there, but if absent PowerShell will happily record a NULL value for us.
		$row | Add-Member -MemberType NoteProperty -Name "LastScanDate" -Value $devices[$i].last_scan
		
		# Get extra data about the host
		$currDevice = Invoke-RestMethod $devices[$i].self -Credential $credential
		$row | Add-Member -MemberType NoteProperty -Name "OS" -Value $currDevice.operating_system.name
		if (!$currDevice.os_install_date)
		{
			$row | Add-Member -MemberType NoteProperty -Name "OS-Install-Date" -Value "(not available)"
		}
		else
		{
			$row | Add-Member -MemberType NoteProperty -Name "OS-Install-Date" -Value $currDevice.os_install_date
		}
		if (!$currDevice.bios.name)
		{
			$row | Add-Member -MemberType NoteProperty -Name "Bios" -Value $null
		}
		else 
		{
			$row | Add-Member -MemberType NoteProperty -Name "Bios" -Value $currDevice.bios.name
		}		
		# IP Address is an array of 0 or more IP Addresses. We might not have any, or we might have LOTS.
		$num = $currDevice.ip_address.count
		if ($num -eq 0)
		{
			$row | Add-Member -MemberType NoteProperty -Name "IP-Address" -Value "(no IP address)"
		}
		else 
		{
			if ($num -eq 1)
			{
				$row | Add-Member -MemberType NoteProperty -Name "IP-Address" -Value $currDevice.ip_address[0].ip_address
			}
			else {
				# list of addresses, needs to be separated by semi-colons
				$addresslist = ""
				$j = 0
				while ($j -lt $num)
				{
					$addresslist = -join($addresslist, $currDevice.ip_address[$j].ip_address)
					if ($j -lt $num)
					{
						$addresslist = -join($addresslist, ";")
					}
					$j = $j + 1
				}
				$row | Add-Member -MemberType NoteProperty -Name "IP-Address" -Value $addresslist
			}
		}
		
		# Is this device physical or virtual
		if ($currDevice.is_virtual -eq "false")
		{
			# This is a physical target
			# We can fill in physical hardware details directly, and leave the entries for virtual hardware blank
			
			# Physical device RAM
			$row | Add-Member -MemberType NoteProperty -Name "PhysicalRAM" -Value $currDevice.total_memory_mb
			
			# Physical Device CPU Info
			# Sometimes we don't get CPU Information
			if ( (!$currDevice.cpu_count) -or ($currDevice.cpu_count -eq 0) )
			{
				# Physical CPU info not avialble
				$row | Add-Member -MemberType NoteProperty -Name "PhysicalCPUCount" -Value "n/a"
				$row | Add-Member -MemberType NoteProperty -Name "PhysicalCoreCount" -Value "n/a"
				$row | Add-Member -MemberType NoteProperty -Name "PhysicalCoresPerCPU" -Value "n/a"
				$row | Add-Member -MemberType NoteProperty -Name "PhysicalCPUManufacturer" -Value "n/a"
				$row | Add-Member -MemberType NoteProperty -Name "PhysicalCPUModel" -Value "n/a"
				$row | Add-Member -MemberType NoteProperty -Name "PhysicalCPUSpeed" -Value "n/a"
			}
			else
			{
				# we have at least some CPU info
				$row | Add-Member -MemberType NoteProperty -Name "PhysicalCPUCount" -Value $currDevice.cpu_count
				$row | Add-Member -MemberType NoteProperty -Name "PhysicalCoreCount" -Value $currDevice.core_count
				# Further details will be derived from cpu[0] if present
				if (!$currDevice.cpu[0].manufacturer)
				{
					# additional info missing
					$row | Add-Member -MemberType NoteProperty -Name "PhysicalCoresPerCPU" -Value "n/a"
					$row | Add-Member -MemberType NoteProperty -Name "PhysicalCPUManufacturer" -Value "n/a"
					$row | Add-Member -MemberType NoteProperty -Name "PhysicalCPUModel" -Value "n/a"
					$row | Add-Member -MemberType NoteProperty -Name "PhysicalCPUSpeed" -Value "n/a"
				}
				else
				{
					$row | Add-Member -MemberType NoteProperty -Name "PhysicalCoresPerCPU" -Value $currDevice.cpu[0].core_count
					$row | Add-Member -MemberType NoteProperty -Name "PhysicalCPUManufacturer" -Value $currDevice.cpu[0].manufacturer
					$row | Add-Member -MemberType NoteProperty -Name "PhysicalCPUModel" -Value $currDevice.cpu[0].cpu_model
					$row | Add-Member -MemberType NoteProperty -Name "PhysicalCPUSpeed" -Value $currDevice.cpu[0].cpu_speed
				}
			}
			$row | Add-Member -MemberType NoteProperty -Name "PhysicalModelSocketCount" -Value "n/a" # not exposed in V4 RestAPI
			$row | Add-Member -MemberType NoteProperty -Name "PhysicalModelCoreCount" -Value "n/a" # not exposed in V4 RestAPI
			$row | Add-Member -MemberType NoteProperty -Name "PhysicalDeviceManufacturer" -Value $currDevice.manufacturer

			$row | Add-Member -MemberType NoteProperty -Name "PhysicalHostname" -Value $dev.host_name			
			# 
			# Add this later
			# $row | Add-Member -MemberType NoteProperty -Name "PhysicalMACAddress" -Value $null
			
		}
		else 
		{
			# This is a virtual target
			if (($currDevice.cpu_count -eq 0) -or (!$currDevice.cpu_count))
			{
				# Physical CPU info not avialble
				$row | Add-Member -MemberType NoteProperty -Name "VirtualCPUCount" -Value "n/a"
				$row | Add-Member -MemberType NoteProperty -Name "VirtualCoreCount" -Value "n/a"
				$row | Add-Member -MemberType NoteProperty -Name "PhysicalCoresPerCPU" -Value "n/a"
				$row | Add-Member -MemberType NoteProperty -Name "PhysicalCPUManufacturer" -Value "n/a"
				$row | Add-Member -MemberType NoteProperty -Name "PhysicalCPUModel" -Value "n/a"
				$row | Add-Member -MemberType NoteProperty -Name "PhysicalCPUSpeed" -Value "n/a"
			}
			else {			
				$row | Add-Member -MemberType NoteProperty -Name "VirtualCPUCount" -Value $currDevice.cpu_count
				$row | Add-Member -MemberType NoteProperty -Name "VirtualCoreCount" -Value $currDevice.core_count
			}
			$row | Add-Member -MemberType NoteProperty -Name "VirtualRAM" -Value $currDevice.total_memory_mb
			$row | Add-Member -MemberType NoteProperty -Name "DeviceModel" -Value $currDevice.model
			
			# Do something with MAC addresses for VMs
			
			# Now, if the VM host we're running on was scanned, we can do something with the following:
			if (!$currDevice.virtual_host.device_id)
			{
				# host not scanned, record an error by putting "n/a" in physical hostname, leave everything else blank
				$row | Add-Member -MemberType NoteProperty -Name "PhysicalHostname" -Value "n/a"
			}
			else 
			{
				# host was scanned, so let's populate as many details as possible about the physical host
				$row | Add-Member -MemberType NoteProperty -Name "PhysicalCPUCount" -Value $currDevice.virtual_host.cpu_count
				$row | Add-Member -MemberType NoteProperty -Name "PhysicalCoreCount" -Value $currDevice.virtual_host.core_count
				if ( ($currDevice.virtual_host.cpu_count -ne 0) -and ($currDevice.virtual_host.core_count -ne 0) )
				{
					$cpcpu = $currDevice.virtual_host.core_count / $currDevice.virtual_host.cpu_count
					$row | Add-Member -MemberType NoteProperty -Name "PhysicalCoresPerCPU" -Value $cpcpu
				}
				# In order to get the CPU Manufacturer information, you need to follow the link to 
				# $currDevice.virtual_host.self and parse the CPU info there. This is left as an exercise to the user
				$row | Add-Member -MemberType NoteProperty -Name "PhysicalCPUModel" -Value "n/a"
				$row | Add-Member -MemberType NoteProperty -Name "PhysicalCPUSpeed" -Value "n/a"
				$row | Add-Member -MemberType NoteProperty -Name "PhysicalRAM" -Value $currDevice.virtual_host.total_memory_mb
				$row | Add-Member -MemberType NoteProperty -Name "PhysicalDeviceManufacturer" -Value $currDevice.virtual_host.manufacturer
				$row | Add-Member -MemberType NoteProperty -Name "PhysicalHostname" -Value $currDevice.virtual_host.host_name
				
				# In order to get the MAC Address for the physical host, you need to follow the link to 
				# $currDevice.virtual_host.self and parse the MAC info there. This is left as an exercise to the user
				$row | Add-Member -MemberType NoteProperty -Name "PhysicalMACAddress" -Value "n/a"
			}
		}
		$csv += $row
		$i = $i + 1;		# keep track for inner loop
		$seen = $seen + 1;  # keep track for outer loop
		if ( $seen % 10 -eq 0) {
			# progress indicator - display a "." every 10 devices
			write-host "." -nonewline
		}
	}
	# Finished this batch
	$offset = $seen
}
# Save the output to a file
write-host " Done. Saving output Fileto OutputDevices.csv now."
$csv | Export-csv OutputDevices.csv -NoTypeInformation

...

Versions Compared

Old Version 27

New Version 28

Key